Marla Flowers Armchair August 28th, 2018 - 10:01:14
A continuing trend in modern furniture design has been the sacrificing of comfort for economy and space. While agreeing that those huge Victorian armchairs were really luxurious, designers today would argue that they would be very much out of place in a modern house, as well as being inordinately expensive. So, designers concentrate on producing chairs which can easily be mass produced and which fit contemporary tastes. Unfortunately of course, the result of such thinking is that most chairs manufactured now tend to merely ornament a room without being very comfortable.
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.
It is possible to have cushions made up for you by professionals, but they are easy to make yourself from rubber and the covering of your choice.
Now mark and cut out the slots which house the back panel. These are 165mm long, 13mm wide, and run at an angel of 82° to the top edges of the side panels. Use the methods detailed above to mark and cut them accurately.
Some of the most comfortable furniture pieces are the ones that have been in your home for several generations. They exude a welcoming and lived-in ambiance to which people easily resonate. A rococo armchair in the living room may resemble the chair that your great grandmother sat on in the black and white photograph hanging on the wall of memories. This brings a vivid sense of nostalgia that compels you to look back to the past. Furniture pieces made long ago have a valuable history attached to them. Resting in an antique armchair that was passed down through several generations, you can let your imagination take you away to those earlier times and make connections with those who sat upon that very chair as the decades passed.
Wood is used for the basic frame. Pine or some other softwood is suitable, but a satisfactory and cheaper alternative is 16mm plywood. As with most manufactured materials, there are different grades of plywood and you should choose a high quality type, such as Finnish birch, which takes a very good painted finish on both surfaces.
Copyright © 2018 scalabeyond.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Bath rugs console table baby blanket pillow storage bench chaise lounge recling sofa sectional sleeper sofa landscape lighting salt lamps neon signs table runner 43 inch tv stand.