Marla Flowers Armchair August 28th, 2018 - 10:11:30
This chair has a very simple construction. It consists simply of four panels which slot together to give a stable assembly. Despite its simplicity, its lines are as stylish as any manufactured chair and will complement any living room.
The notion of reconnecting with the past may spur us to find antique furniture pieces and welcome them in our homes, but this is not the only reason why we do so. Our taste for old glamour sends us back to adoring beautiful carvings and exquisite craftsmanship of traditional and classical designs. Nothing beats Victorian armchairs in magnificence and intricacy. They are luxurious to look at and even more luxurious to sink in to. The luscious velvet upholstery envelops your body like a warm embrace. Chippendale armchairs with their pagoda or gothic designed backrests attract the eyes with their complexity and fascinating fusion of style. Chinese yoke back armchairs have light and curvaceous silhouettes with smooth and rich solid wood that reminds you of another dynasty, another culture. Some of the most extravagant looking antique armchairs came from the Queen Anne period when they served royalty and nobles, now they provide a comforting piece of sitting and lounging furniture in a modified classical living room or a masculine and eclectic library.
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length - 165mm and are located 64mm from, and parallel to, the short sides, and is 368mm. in length.
Cut out all the pieces to the sizes given in the cutting list, taking care that the two side panels match exactly. These pieces now have to be cut to patterns and as this work represents the major part of the construction processes, great care should be taken.
Provided both side panels have been cut to exactly the same size, there is no reason why you should not clamp them together with all edges flush and cut out paired slots at the same time.
Copyright © 2019 scalabeyond.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Laundry hamper console table baby blanket travel pillow deck box sleeper sofa recling sofa sectional sleeper sofa wall sticker best vanity lights lite neon signs black table runner 43 inch tv stand.