Faye Poole Armchair September 05th, 2018 - 06:16:50
The most remarkable antique armchair is a treasure to be found especially if it is in excellent condition and maintains its original magnificent appeal. Purchasing an antique armchair requires a serious decision-making task. They are a challenge to combine with your contemporary furniture pieces and they cost more than most of the new designs that are available today. You have to be an excellent scavenger and must have a keen and adoring eye for the beauty possessed by the old and the classical. An antique armchair hunt is fun and exciting, especially after you have found the one that you want. Preferably you want to find the chair that is most suitable for your home with a size that is proportionate to the rest of your furniture pieces and harmonizes well with the design theme of your living room or bedroom. If you have the time and resources, it would be a fascinating experience for you to explore furniture stores and antique shops for the perfect armchair for your home. There are also a myriad of antique armchairs made from different eras with varying styles and designs that you can find on the internet. You will need to combine patience, resourcefulness and enthusiasm for the exciting search. When you find the chair you are looking for though, and carefully place it in your own home, it hunt will be worth it.
One answer to the problem, which has been developed over the last few years, is furniture which can easily and quickly be stowed away when not in use. Nowadays it is possible to buy inflatable chairs, and more conventional chairs which can be assembled or dismantled in a matter of seconds. It is on this latter principle that the knock-down chair has been designed.
Wood is used for the basic frame. Pine or some other softwood is suitable, but a satisfactory and cheaper alternative is 16mm plywood. As with most manufactured materials, there are different grades of plywood and you should choose a high quality type, such as Finnish birch, which takes a very good painted finish on both surfaces.
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.
While many of us watched MTV Cribs bursting with jealousy and loathing, some of us might have seen the cinema rooms in a number of celebrity mansions as inspiration for a smaller-scale cinema room project of their own.
This chair has a very simple construction. It consists simply of four panels which slot together to give a stable assembly. Despite its simplicity, its lines are as stylish as any manufactured chair and will complement any living room.