Shelby Mann Armchair July 06th, 2018 - 23:51:46
Provided both side panels have been cut to exactly the same size, there is no reason why you should not clamp them together with all edges flush and cut out paired slots at the same time.
A vacant space under a set of stairs can easily be transformed into a reading area with the addition of an armchair, and little else. It's a simple, cost-effective change - no shelving, carpeting and so on necessary. You just need to fit in with the colour scheme of your hall.
Why restrict ourselves, though? There are a number of rooms that armchairs would easily fit into, and in fact, there are a number of use cases that are crying out for armchairs above all else. With handcrafted furniture companies (see below for an example), you have ample options to tailor an armchair to those specific environments. No need to worry about your armchair looking like it's been pulled straight out of the living room and is being held somewhere else temporarily.
Planning your decor according to the size of your space is critical, no matter whether the room is large or small. Home furniture needs some space in between it to ensure proper room flow, traffic flow and safety.
Planning out your space is absolutely crucial when you are living in a small space. For safety you need to allocate a safe space between articles of furniture. In the case of between chairs and the sofa, a space of between 2 to 3 feet should be adequate to prevent hitting the exterior against the furniture every time you move. You also need to have a minimum of 2 foot between the front of your chair or sofa and your coffee table to allow you sufficient room when you stand up. You don't really want to overbalance and keel over across the coffee table if you lose your balance!
First tale the two side panels and cut out the angled rear edge. To do this accurately, mark a line 25mm from the rear edge, then draw a line diagonally from opposite corners. Provided your two side panels match exactly in size, you can clamp them together and cut along the diagonal line to give a matching pair.