Alexandra Stokes Armchair July 06th, 2018 - 20:21:42
Now mark and cut out the slots which house the back panel. These are 165mm long, 13mm wide, and run at an angel of 82° to the top edges of the side panels. Use the methods detailed above to mark and cut them accurately.
Should the armchairs for sale you're taking a look at are to be alongside a sofa, then you want to leave at least 2 feet between them. You also want to leave at least two feet between the armchair and coffee table to stop banging the knees each and every time you stand up!
Use a tenon saw to cut the slot, following the rules on correct sawing techniques given in most DIY manuals. If you cut exactly to the marked lines, you will make the slot slightly too wide. Instead, position the saw so that one face is just inside and parallel to the line. When you have cut down the lines, cut out the short edge of the slot with a jig saw or chisel.
First tale the two side panels and cut out the angled rear edge. To do this accurately, mark a line 25mm from the rear edge, then draw a line diagonally from opposite corners. Provided your two side panels match exactly in size, you can clamp them together and cut along the diagonal line to give a matching pair.
Provided both side panels have been cut to exactly the same size, there is no reason why you should not clamp them together with all edges flush and cut out paired slots at the same time.
As for the well-lit study suggestion, appealing though it sounds to work under the sun without contending with sudden winds, nothing renders a computer screen unreadable as quickly as sunlight shining directly onto it. Before you know it you've closed so many blinds to block out the sun you've taken away all of the benefits of the conservatory in the first place.