Lilian Ware Armchair November 19th, 2018 - 16:35:20
Cut out all the pieces to the sizes given in the cutting list, taking care that the two side panels match exactly. These pieces now have to be cut to patterns and as this work represents the major part of the construction processes, great care should be taken.
While many of us watched MTV Cribs bursting with jealousy and loathing, some of us might have seen the cinema rooms in a number of celebrity mansions as inspiration for a smaller-scale cinema room project of their own.
One answer to the problem, which has been developed over the last few years, is furniture which can easily and quickly be stowed away when not in use. Nowadays it is possible to buy inflatable chairs, and more conventional chairs which can be assembled or dismantled in a matter of seconds. It is on this latter principle that the knock-down chair has been designed.
In the modern trend the armchair has become an important piece of furniture along with the sofa and other furniture that you buy to decorate your house. Purchasing the armchair requires special consideration as it will not only add to the beauty of the room but will also provide comfort and relaxation when you recline in it to watch your favorite show on the television or read the newspaper or just relax after a tiring day.
The chair itself has to be in comparative proportion to your room you're placing it in. If you've got a large area, with heavy furniture, then a compact, thin-armed chair will appear delicate and out of place. If you've got a small room, then an armchair that's got thick arms and curved features will overpower all of your furniture. Either way, a room will appear and feel off-balance.
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.
Copyright © 2019 scalabeyond.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Bathroom light area rugs wool blanket neck pillow deck box chaise with sleeper recling sofa best sectional sofa porch swings vanity lights lava lamps black table runner best tv stand.