Rosanna Joseph Armchair September 08th, 2018 - 10:05:56
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length - 165mm and are located 64mm from, and parallel to, the short sides, and is 368mm. in length.
It is possible to have cushions made up for you by professionals, but they are easy to make yourself from rubber and the covering of your choice.
Many of the armchairs don't do that and many have seats at the wrong angle. Making it completely uncomfortable to sit in. However, a few manufacturers seem to take comfort, style and size into consideration. And from these few, it's possible to choose some that are not only suitable sized armchairs for small spaces but ones that evince plenty of real style as well.
One answer to the problem, which has been developed over the last few years, is furniture which can easily and quickly be stowed away when not in use. Nowadays it is possible to buy inflatable chairs, and more conventional chairs which can be assembled or dismantled in a matter of seconds. It is on this latter principle that the knock-down chair has been designed.
First tale the two side panels and cut out the angled rear edge. To do this accurately, mark a line 25mm from the rear edge, then draw a line diagonally from opposite corners. Provided your two side panels match exactly in size, you can clamp them together and cut along the diagonal line to give a matching pair.
From where I'm sitting, using it as a summer dining area seems unnecessary. Your summer dining area will be your garden or patio if you have the space, and if the weather is good enough, so why would you need what is effectively a tertiary dining area?