Rosanna Joseph Armchair August 19th, 2018 - 23:28:23
There is a danger that this chair might end up being used as an incredibly luxurious shoe fitting point, however. If you don't think anyone in your family is likely to actually read under the stairs, the armchair may end up being more decorative than functional - which might not be a problem for you, depending on your circumstances.
While the rich and famous might have the space for a thirty-seating cinema in their basement, the rest of us don't. So the rows of plush cinema seating that the stars have aren't really of any use to us. A handful of armchairs would neatly achieve the same objective, though.
Be it an email you just need to send that night, or some last minute present buying or travel arrangements, our lives are increasingly ruled by devices, and at the same time, we're increasingly expected to be accessible and available all hours of the day.
The conservatory as TV-less living room argument is persuasive though. Perfect for entertaining guests before dinner, or even for day-to-day reading, web browsing, or just for sitting down with a cup of coffee and looking out at the scenery. You could start with an armchair, and then add other living room accoutrements if the armchair trial proves successful and desirable.
Conservatories are difficult to contend with, furniture-wise. Do you make the conservatory a secondary summer dining area, a bright working space, or a living room without a TV?
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.