Lilian Ware Armchair August 12th, 2018 - 03:28:34
Now mark and cut out the slots which house the back panel. These are 165mm long, 13mm wide, and run at an angel of 82° to the top edges of the side panels. Use the methods detailed above to mark and cut them accurately.
Provided both side panels have been cut to exactly the same size, there is no reason why you should not clamp them together with all edges flush and cut out paired slots at the same time.
The seat panel has two slots cut in it, corresponding to those cut in the front edge of the side panels. Each slot is located 64mm from and parallel to the short sides and is 368mm in length.
When choosing armchairs for small spaces you need to ensure the size of those armchairs don't dominate the overall proportions of the room they are intended for. It's not just the size either, but the style that you need to be careful of. When choosing armchairs for small spaces, ensure you choose armchairs with thin arms, freestanding legs rather than legs that are hidden by flaps of upholstery. And when it is a choice between curves and straight lines, forget about the curves - when you want to fit armchairs for small spaces, always go for clean straight lines. You may even consider choosing armchairs with no arms at all - that is bound to save you some space, albeit not a great deal but it will also trick the eye into believing there's more than there is.
Cut out all the pieces to the sizes given in the cutting list, taking care that the two side panels match exactly. These pieces now have to be cut to patterns and as this work represents the major part of the construction processes, great care should be taken.
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.
Copyright © 2018 scalabeyond.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Bathroom light candle holders blanket neck pillow storage shed sleeper sofa ottoman chair sectional sofa landscape lighting vanity lights neon signs best table runner 43 inch tv stand.