Rosanna Joseph Armchair August 26th, 2018 - 16:02:34
While the rich and famous might have the space for a thirty-seating cinema in their basement, the rest of us don't. So the rows of plush cinema seating that the stars have aren't really of any use to us. A handful of armchairs would neatly achieve the same objective, though.
A vacant space under a set of stairs can easily be transformed into a reading area with the addition of an armchair, and little else. It's a simple, cost-effective change - no shelving, carpeting and so on necessary. You just need to fit in with the colour scheme of your hall.
Use a tenon saw to cut the slot, following the rules on correct sawing techniques given in most DIY manuals. If you cut exactly to the marked lines, you will make the slot slightly too wide. Instead, position the saw so that one face is just inside and parallel to the line. When you have cut down the lines, cut out the short edge of the slot with a jig saw or chisel.
From where I'm sitting, using it as a summer dining area seems unnecessary. Your summer dining area will be your garden or patio if you have the space, and if the weather is good enough, so why would you need what is effectively a tertiary dining area?
The chair itself has to be in comparative proportion to your room you're placing it in. If you've got a large area, with heavy furniture, then a compact, thin-armed chair will appear delicate and out of place. If you've got a small room, then an armchair that's got thick arms and curved features will overpower all of your furniture. Either way, a room will appear and feel off-balance.
If you trawl through the enormous array of different styles that the various manufacturers, you may notice that most armchairs seem to lack in originality. The problem with many designers is they seem to forget people have to sit in the chairs and it's the act of sitting that inspires the design of the chair... not the other way around. Furthermore, the armchair is designed to be sat in with comfort in mind: where backs, buttocks and arms should be supported ergonomically to take the pressure off the muscles across the shoulders and lower neck.