Cecelia Gallagher Armchair August 30th, 2018 - 13:31:13
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length - 165mm and are located 64mm from, and parallel to, the short sides, and is 368mm. in length.
The size of a chair needs to be taken into consideration when you don't have a great deal of room to manoeuvre. When you are considering armchairs for small spaces you might consider a smaller version of a standard chair. This should be between 24 inches and 32 inches wide - usually ample room to allow somebody to be seated comfortably. Never leave sizing to chance, hoping that it will slot into that rather neat little place you have planned for it. You need to be ruthless with measurements - make sure you measure the space you have and the furniture you want to fill it with.
In the modern trend the armchair has become an important piece of furniture along with the sofa and other furniture that you buy to decorate your house. Purchasing the armchair requires special consideration as it will not only add to the beauty of the room but will also provide comfort and relaxation when you recline in it to watch your favorite show on the television or read the newspaper or just relax after a tiring day.
From where I'm sitting, using it as a summer dining area seems unnecessary. Your summer dining area will be your garden or patio if you have the space, and if the weather is good enough, so why would you need what is effectively a tertiary dining area?
Cut out all the pieces to the sizes given in the cutting list, taking care that the two side panels match exactly. These pieces now have to be cut to patterns and as this work represents the major part of the construction processes, great care should be taken.
First tale the two side panels and cut out the angled rear edge. To do this accurately, mark a line 25mm from the rear edge, then draw a line diagonally from opposite corners. Provided your two side panels match exactly in size, you can clamp them together and cut along the diagonal line to give a matching pair.