Marla Flowers Armchair July 06th, 2018 - 20:03:29
Provided both side panels have been cut to exactly the same size, there is no reason why you should not clamp them together with all edges flush and cut out paired slots at the same time.
While the rich and famous might have the space for a thirty-seating cinema in their basement, the rest of us don't. So the rows of plush cinema seating that the stars have aren't really of any use to us. A handful of armchairs would neatly achieve the same objective, though.
While many of us watched MTV Cribs bursting with jealousy and loathing, some of us might have seen the cinema rooms in a number of celebrity mansions as inspiration for a smaller-scale cinema room project of their own.
The armchair in the bedroom helps with a very 21st century issue - the quandary of laptop, tablet or phone use in bed while your partner is trying to sleep.
Use a tenon saw to cut the slot, following the rules on correct sawing techniques given in most DIY manuals. If you cut exactly to the marked lines, you will make the slot slightly too wide. Instead, position the saw so that one face is just inside and parallel to the line. When you have cut down the lines, cut out the short edge of the slot with a jig saw or chisel.
Cut out all the pieces to the sizes given in the cutting list, taking care that the two side panels match exactly. These pieces now have to be cut to patterns and as this work represents the major part of the construction processes, great care should be taken.