Home / Armchair / Mid Century Modern Small Desk / Mid Century Modern Small Desk Mid Century Modern Small Desk Madison Home Mid Century Modern Small Work / Computer Desk Small Mid Century Modern Writing Desk
Lilian Ware Armchair September 01st, 2018 - 19:26:12
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length - 165mm and are located 64mm from, and parallel to, the short sides, and is 368mm. in length.
Wood is used for the basic frame. Pine or some other softwood is suitable, but a satisfactory and cheaper alternative is 16mm plywood. As with most manufactured materials, there are different grades of plywood and you should choose a high quality type, such as Finnish birch, which takes a very good painted finish on both surfaces.
Should the armchairs for sale you're taking a look at are to be alongside a sofa, then you want to leave at least 2 feet between them. You also want to leave at least two feet between the armchair and coffee table to stop banging the knees each and every time you stand up!
Many of the armchairs don't do that and many have seats at the wrong angle. Making it completely uncomfortable to sit in. However, a few manufacturers seem to take comfort, style and size into consideration. And from these few, it's possible to choose some that are not only suitable sized armchairs for small spaces but ones that evince plenty of real style as well.
Some of the most comfortable furniture pieces are the ones that have been in your home for several generations. They exude a welcoming and lived-in ambiance to which people easily resonate. A rococo armchair in the living room may resemble the chair that your great grandmother sat on in the black and white photograph hanging on the wall of memories. This brings a vivid sense of nostalgia that compels you to look back to the past. Furniture pieces made long ago have a valuable history attached to them. Resting in an antique armchair that was passed down through several generations, you can let your imagination take you away to those earlier times and make connections with those who sat upon that very chair as the decades passed.
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.