Kathy Albert Armchair August 18th, 2018 - 19:28:36
First tale the two side panels and cut out the angled rear edge. To do this accurately, mark a line 25mm from the rear edge, then draw a line diagonally from opposite corners. Provided your two side panels match exactly in size, you can clamp them together and cut along the diagonal line to give a matching pair.
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length 165mm. and are located 64mm. from, and parallel to, the short sides.
While the rich and famous might have the space for a thirty-seating cinema in their basement, the rest of us don't. So the rows of plush cinema seating that the stars have aren't really of any use to us. A handful of armchairs would neatly achieve the same objective, though.
While many of us watched MTV Cribs bursting with jealousy and loathing, some of us might have seen the cinema rooms in a number of celebrity mansions as inspiration for a smaller-scale cinema room project of their own.
Wood is used for the basic frame. Pine or some other softwood is suitable, but a satisfactory and cheaper alternative is 16mm plywood. As with most manufactured materials, there are different grades of plywood and you should choose a high quality type, such as Finnish birch, which takes a very good painted finish on both surfaces.
Planning out your space is absolutely crucial when you are living in a small space. For safety you need to allocate a safe space between articles of furniture. In the case of between chairs and the sofa, a space of between 2 to 3 feet should be adequate to prevent hitting the exterior against the furniture every time you move. You also need to have a minimum of 2 foot between the front of your chair or sofa and your coffee table to allow you sufficient room when you stand up. You don't really want to overbalance and keel over across the coffee table if you lose your balance!