Muriel Knowles Armchair July 06th, 2018 - 23:47:51
Use a tenon saw to cut the slot, following the rules on correct sawing techniques given in most DIY manuals. If you cut exactly to the marked lines, you will make the slot slightly too wide. Instead, position the saw so that one face is just inside and parallel to the line. When you have cut down the lines, cut out the short edge of the slot with a jig saw or chisel.
Cut out all the pieces to the sizes given in the cutting list, taking care that the two side panels match exactly. These pieces now have to be cut to patterns and as this work represents the major part of the construction processes, great care should be taken.
From where I'm sitting, using it as a summer dining area seems unnecessary. Your summer dining area will be your garden or patio if you have the space, and if the weather is good enough, so why would you need what is effectively a tertiary dining area?
The conservatory as TV-less living room argument is persuasive though. Perfect for entertaining guests before dinner, or even for day-to-day reading, web browsing, or just for sitting down with a cup of coffee and looking out at the scenery. You could start with an armchair, and then add other living room accoutrements if the armchair trial proves successful and desirable.
As for the well-lit study suggestion, appealing though it sounds to work under the sun without contending with sudden winds, nothing renders a computer screen unreadable as quickly as sunlight shining directly onto it. Before you know it you've closed so many blinds to block out the sun you've taken away all of the benefits of the conservatory in the first place.
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length 165mm. and are located 64mm. from, and parallel to, the short sides.