Evangeline Duffy Armchair August 24th, 2018 - 14:28:17
Wood is used for the basic frame. Pine or some other softwood is suitable, but a satisfactory and cheaper alternative is 16mm plywood. As with most manufactured materials, there are different grades of plywood and you should choose a high quality type, such as Finnish birch, which takes a very good painted finish on both surfaces.
When choosing armchairs for small spaces you need to ensure the size of those armchairs don't dominate the overall proportions of the room they are intended for. It's not just the size either, but the style that you need to be careful of. When choosing armchairs for small spaces, ensure you choose armchairs with thin arms, freestanding legs rather than legs that are hidden by flaps of upholstery. And when it is a choice between curves and straight lines, forget about the curves - when you want to fit armchairs for small spaces, always go for clean straight lines. You may even consider choosing armchairs with no arms at all - that is bound to save you some space, albeit not a great deal but it will also trick the eye into believing there's more than there is.
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length - 165mm and are located 64mm from, and parallel to, the short sides, and is 368mm. in length.
The important fact that you have to consider is the function that the room will involve. It means that if the room is such which will be utilized for frequent movements then it is better to buy an armchair that is not to bulky as shifting it from one place to another will be problematic. The position of reclining is also important that is if you want an armchair that should give support to your head then choose an upright armchair with hand rest.
A great rule of thumb is the fact that the bigger your space, the 'heavier' your armchair could be (and the other way round). A study covered with walls of book shelves and wood panels can accommodate a heavy, dominating chair. Look at armchairs for sale who have rich detailing and more classic design. For a more modern space, especially a smaller space, look for free standing legs and slimmer arm rests, and straight, clean lines.
Now mark and cut out the slots which house the back panel. These are 165mm long, 13mm wide, and run at an angel of 82° to the top edges of the side panels. Use the methods detailed above to mark and cut them accurately.