Reva Freeman Armchair August 27th, 2018
The seat panel has two slots cut in it, corresponding to those cut in the front edge of the side panels. Each slot is located 64mm from and parallel to the short sides and is 368mm in length....
Jackie Copeland Armchair August 14th, 2018
First tale the two side panels and cut out the angled rear edge. To do this accurately, mark a line 25mm from the rear edge, then draw a line diagonally from opposite corners. Provided your two side panels match exactly...
Rosanna Joseph Armchair August 14th, 2018
The most remarkable antique armchair is a treasure to be found especially if it is in excellent condition and maintains its original magnificent appeal. Purchasing an antique armchair requires a serious decision-making task. They are a challenge to combine with...
Faye Poole Armchair August 14th, 2018
When choosing armchairs for small spaces you need to ensure the size of those armchairs don't dominate the overall proportions of the room they are intended for. It's not just the size either, but the style that you need to...
Toni Velez Armchair August 14th, 2018
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length - 165mm and are located 64mm from, and parallel to, the short sides, and is...
Alexandra Stokes Armchair August 13th, 2018
Cut out all the pieces to the sizes given in the cutting list, taking care that the two side panels match exactly. These pieces now have to be cut to patterns and as this work represents the major part of...
Jackie Copeland Armchair August 13th, 2018
A vacant space under a set of stairs can easily be transformed into a reading area with the addition of an armchair, and little else. It's a simple, cost-effective change - no shelving, carpeting and so on necessary. You just...
Kathie Hendrix Armchair August 13th, 2018
In a larger place this is not as important, however you should still get the measurements of any armchairs for sale to ensure that you'll be able to leave enough room round the piece for flow and safety....