Evangeline Duffy Armchair August 07th, 2018
If you are preparing to buy an armchair then the first thing that you have to keep in mind is the size of the room where you are going to keep the armchair. It should also match with the décor...
Jackie Copeland Armchair August 14th, 2018
We can be ever so rigid in our thinking at times. Armchairs and sofas go in the living room, don't they? That's where they've always gone. That's where we relax in front of the TV, open Christmas presents, and have...
Rosanna Joseph Armchair August 14th, 2018
Whenever you're browsing armchairs for sale, it is easy to be embroiled in just going through the styles, colors and fabrics and choosing based on looks alone. However, that is a mistake. A well-chosen armchair can be the focal point...
Faye Poole Armchair August 14th, 2018
Two slots corresponding to those cut in the top edges of the side panels are made in the back panel. They are the same length 165mm. and are located 64mm. from, and parallel to, the short sides....
Toni Velez Armchair August 14th, 2018
Perhaps the greatest limitation on furniture design is the smallness of modern houses. To be comfortable, a chair must not only be well designed, constructed and padded, but also it must be fairly large. As few people can afford the...
Alexandra Stokes Armchair August 13th, 2018
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs...
Jackie Copeland Armchair August 13th, 2018
While many of us watched MTV Cribs bursting with jealousy and loathing, some of us might have seen the cinema rooms in a number of celebrity mansions as inspiration for a smaller-scale cinema room project of their own....
Kathie Hendrix Armchair August 13th, 2018
Use a tenon saw to cut the slot, following the rules on correct sawing techniques given in most DIY manuals. If you cut exactly to the marked lines, you will make the slot slightly too wide. Instead, position the saw...