Brittney Vinson Armchair August 25th, 2018 - 17:53:13
The notion of reconnecting with the past may spur us to find antique furniture pieces and welcome them in our homes, but this is not the only reason why we do so. Our taste for old glamour sends us back to adoring beautiful carvings and exquisite craftsmanship of traditional and classical designs. Nothing beats Victorian armchairs in magnificence and intricacy. They are luxurious to look at and even more luxurious to sink in to. The luscious velvet upholstery envelops your body like a warm embrace. Chippendale armchairs with their pagoda or gothic designed backrests attract the eyes with their complexity and fascinating fusion of style. Chinese yoke back armchairs have light and curvaceous silhouettes with smooth and rich solid wood that reminds you of another dynasty, another culture. Some of the most extravagant looking antique armchairs came from the Queen Anne period when they served royalty and nobles, now they provide a comforting piece of sitting and lounging furniture in a modified classical living room or a masculine and eclectic library.
Now mark and cut out the slots which house the back panel. These are 165mm long, 13mm wide, and run at an angel of 82° to the top edges of the side panels. Use the methods detailed above to mark and cut them accurately.
Now cut the slots in the side panels. There are two on each: one houses the back panel and the other houses the seat panel. Make the slot for the seat panel first. This slot, which is 16mm wide, runs at angle, from a point about halfway down the front edge, to a point 368mm from the front edge. To mark it in exactly, first draw a point on the front, short edge, 267mm from the top long edge. With a protractor set at 86° mark in the angle at which the seat panel meets the front edge of the side panel. Then use the two marked points to draw in a line extending 368mm from the front short edge of the side panel. This line marks the proposed location of the upper surface of the seat panel. To mark out the correct width of the slot, draw another point 16mm from that already marked on the front short edge of the side panel and, with the aid of a protractor, draw another line parallel to the first and 16mm from it.
The seat panel has two slots cut in it, corresponding to those cut in the front edge of the side panels. Each slot is located 64mm from and parallel to the short sides and is 368mm in length.
The armchair in the bedroom helps with a very 21st century issue - the quandary of laptop, tablet or phone use in bed while your partner is trying to sleep.
Use a tenon saw to cut the slot, following the rules on correct sawing techniques given in most DIY manuals. If you cut exactly to the marked lines, you will make the slot slightly too wide. Instead, position the saw so that one face is just inside and parallel to the line. When you have cut down the lines, cut out the short edge of the slot with a jig saw or chisel.
Copyright © 2018 scalabeyond.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Bathroom light console table baby blanket travel pillow storage shed sleeper sofa ottoman table sectional sleeper sofa landscape lighting salt lamps lite neon signs table runner 43 inch tv stand.